Surgeons create marvels in facial reconstruction using 3D printing technology - Hindustan Times
close_game
close_game

Surgeons create marvels in facial reconstruction using 3D printing technology

Published on Mar 08, 2022 06:21 PM IST

Zoriox strives to improve access and affordability, create healthier communities, and put a healthy mind, body and environment within reach of everyone, everywhere through 3D Printing Technology.

Zoriox Innovation Labs
Zoriox Innovation Labs
ByHT Brand Studio

India, 8th March 2022: Zoriox Innovation Labs is a medical device company with a young and dynamic team founded by Dr. Karthik Balaji, Krishna Chaitanya Gurijala and Krishna Vaka Reddy along with the Advisory Mentorship of Mr. Suyamburam Sathasivam (Vice President of Sun Pharmaceutical Industries Limited) of Indian origin who has been collectively working with the breakthrough technology in Patient-Specific Implants (PSI) along with facial surgeons for the reconstruction of the face. Zoriox has a team of surgeons, dentists, mechanical engineers, biomedical engineers, software engineers, graphic designers, prosthetists and anatomists to provide a 360-degree solution to Facial Reconstruction and its associated needs.

Zoriox strives to improve access and affordability, create healthier communities, and put a healthy mind, body and environment within reach of everyone, everywhere through 3D Printing Technology. The company is inspired by the opportunity to advance patient care through constant innovation and bridge the gap between technology.

Hindustan Times - your fastest source for breaking news! Read now.

Zoriox Facial Reconstruction Summit presided by Dr. Gunaseelan Rajan, FRCS, Ph.D., D.Sc (Center - Chief Guest)_ Dr. Karthik Balaji (Second from Left_ Managing Director- Zoriox)
Zoriox Facial Reconstruction Summit presided by Dr. Gunaseelan Rajan, FRCS, Ph.D., D.Sc (Center - Chief Guest)_ Dr. Karthik Balaji (Second from Left_ Managing Director- Zoriox)

These implants are tailor-made to meet the requirements of each patient; designed by surgeons and assisted by 3D printing technology, these new-age implants are patient-friendly and cost-effective. This procedure does away with the need for implants taken from healthy parts of the patient. Zoriox Innovation Labs has pioneered and improvised the role of 3D-printed patient-specific implants in the treatment of facial disfigurations.

Zoriox has already made more than 270+ implants and have assisted in surgically placing them in patients all over India and a few of them to other parts of the world. Zoriox has effectively reviewed the completed cases over the last two years. The summit was a grand success, thanks to the knowledge transfer which was achieved through panel discussions.

Prasanna Kumar T E K, CTO of Zoriox Innovation Labs says, “The evolution of technology keeps helping the healthcare industry to solve many problems that are faced by mankind on this earth. We at Zoriox innovate every single day to challenge ourselves.”

Facial disfiguration can be depressing and traumatic. Usually caused by cancer, tumours, infections and accidents. The pandemic had led to an upsurge in cases of facial disfigurations. This is due to Mucormycosis, commonly called 'black fungus', which mainly affects the bones and soft tissues of the face. This, along with trauma, cancer, road accidents and a host of reasons, had brought the role of facial reconstructive surgery to the fore in the last few years. The restoration of the facial contours often involved the combined efforts of oral-maxillofacial surgeons, once-surgeons, ENT, plastic, microvascular, neurosurgeons, general surgeons, prosthodontists, implantology and dental surgeons.

Moreover, surgeons had to transplant bones and replace structures to restore the patient's face. This process involved the identification of 'soul bone' and anchorage of the bone-implant to the receptor site. Apart from being invasive, the whole procedure was a laborious one. A technical summit was held in Chennai, India on the 6th March 2022 with 53 eminent surgeons to discuss the progress made in this field and to debate the overall efficacy of the procedure, with emphasis on how to improve the process further.

Surgeons drawn from diverse fields and engaged in facial reconstructive surgery met at the 'The Westin' in Velachery, Chennai, India to discuss the role of 3D-Printed Implants and ways to enhance their efficacy in the treatment of Mucormycosis and allied cases of facial disfigurement. The convention was presided over by Dr. Gunaseelan Rajan, FRCS, PhD, D.Sc. drawing upon the expertise of facial surgeons from different parts of India, the convention came up with valuable suggestions to improvise the implants further. Various concerns in relation to the design of patient-specific implants, surgical access, the path of insertions, soft tissue closure, favourable wound healing, osseointegration and prosthetic rehabilitation were discussed.

The summit was of particular relevance to the young surgeons of Generation Z, who are familiar with the advent of AI in the medical field and feel at home in the metaverse which will enable the young surgeons to get trained under the environment of the metaverse. This will act as a great educational tool where they can experience the real-time surgery from the comfort of their homes or anywhere; also this platform will help our surgeons to conduct virtual counselling to patients with 'after results' of the surgery - was discussed.

Group of Surgeons and Technical Specialist
Group of Surgeons and Technical Specialist

These implants are tailor-made to meet the requirements of each patient; designed by surgeons and assisted by 3D printing technology, these new-age implants are patient-friendly and cost-effective. This procedure does away with the need for implants taken from healthy parts of the patient. Zoriox Innovation Labs has pioneered and improvised the role of 3D-printed patient-specific implants in the treatment of facial disfigurations.

Zoriox has already made more than 270+ implants and have assisted in surgically placing them in patients all over India and a few of them to other parts of the world. Zoriox has effectively reviewed the completed cases over the last two years. The summit was a grand success, thanks to the knowledge transfer which was achieved through panel discussions.

Prasanna Kumar T E K, CTO of Zoriox Innovation Labs says, “The evolution of technology keeps helping the healthcare industry to solve many problems that are faced by mankind on this earth. We at Zoriox innovate every single day to challenge ourselves.”

Facial disfiguration can be depressing and traumatic. Usually caused by cancer, tumours, infections and accidents. The pandemic had led to an upsurge in cases of facial disfigurations. This is due to Mucormycosis, commonly called 'black fungus', which mainly affects the bones and soft tissues of the face. This, along with trauma, cancer, road accidents and a host of reasons, had brought the role of facial reconstructive surgery to the fore in the last few years. The restoration of the facial contours often involved the combined efforts of oral-maxillofacial surgeons, once-surgeons, ENT, plastic, microvascular, neurosurgeons, general surgeons, prosthodontists, implantology and dental surgeons.

Moreover, surgeons had to transplant bones and replace structures to restore the patient's face. This process involved the identification of 'soul bone' and anchorage of the bone-implant to the receptor site. Apart from being invasive, the whole procedure was a laborious one. A technical summit was held in Chennai, India on the 6th March 2022 with 53 eminent surgeons to discuss the progress made in this field and to debate the overall efficacy of the procedure, with emphasis on how to improve the process further.

Surgeons drawn from diverse fields and engaged in facial reconstructive surgery met at the 'The Westin' in Velachery, Chennai, India to discuss the role of 3D-Printed Implants and ways to enhance their efficacy in the treatment of Mucormycosis and allied cases of facial disfigurement. The convention was presided over by Dr. Gunaseelan Rajan, FRCS, PhD, D.Sc. drawing upon the expertise of facial surgeons from different parts of India, the convention came up with valuable suggestions to improvise the implants further. Various concerns in relation to the design of patient-specific implants, surgical access, the path of insertions, soft tissue closure, favourable wound healing, osseointegration and prosthetic rehabilitation were discussed.

The summit was of particular relevance to the young surgeons of Generation Z, who are familiar with the advent of AI in the medical field and feel at home in the metaverse which will enable the young surgeons to get trained under the environment of the metaverse. This will act as a great educational tool where they can experience the real-time surgery from the comfort of their homes or anywhere; also this platform will help our surgeons to conduct virtual counselling to patients with 'after results' of the surgery - was discussed.

|#+|

The advent of 3D printing technology, biocompatible titanium, medical designing tools along virtual surgical platforms, has revolutionised the field of facial reconstructive surgery. The key advantages of their products namely; surgical time is greatly reduced, any design could be incorporated and manufactured as per the requirement, the cost to the doctor is reduced, post-surgery complications are highly reduced, only minimal armamentarium is required, does not involve surgical complexity, any bone surface can be easily implanted, retention can be easily achieved from any bone, faster healing and loading times, no need of bone grafting procedures, titanium is less prone to generating an immune reaction based on the fact that this material is corrosion-resistant and Inert To human body fluids - biological inertness, high degree of biocompatibility and biointerfacing - (less implant rejection by bone and soft tissue), high osseointegration value due to its high wettability, strong bond creation with phosphates and calcium ions in bone, non-toxic and non-carcinogenic than plastics and other metals.

To know more visit:  Zoriox Innovation Labs

Disclaimer: This content is distributed by SRV Media. No HT journalist is involved in the creation of this content. 

Unlock a world of Benefits with HT! From insightful newsletters to real-time news alerts and a personalized news feed – it's all here, just a click away! -Login Now!
SHARE THIS ARTICLE ON
Share this article
SHARE
Story Saved
Live Score
OPEN APP
Saved Articles
Following
My Reads
Sign out
New Delhi 0C
Friday, March 29, 2024
Start 14 Days Free Trial Subscribe Now
Follow Us On